Description
This machine is use for new Benz Smart remote for
Benz 220/215/210/202/203/219/211/231…
Benz 220/215/210/202/203/219/211/231…
Description:
New tool can programming new blank key with BIN file that's is
generating using Dump Modify software without any dissolder of key
MCU.
it communication with key via IR and RF in mercedes benz security
protocol .( that's meaning you can use it for all type keys and if
there any new key with private mcu no problem )need only to update .
Thenew Mercedes device working with smart key (old and new) using
in carsince 1997 up to 2005 – without keylessgo system. You can program
newkey (ore used) in car and program oun key if its not work more.
You readand program eeprom of CPU from Steering blocking module via
diagnosticconnector (38 pins). Desolder and read via programmer two CPU
fromElectronic Ignition Control Module.Load theese eeproms to program.
Desolder NEC CPU from the key. Soldering it on the device , select theNo
of key and program it. Solder all CPU on their places and start the car.
You can program new keys without the car – only with EISand steering
blocking module.You can read theese CPU with helpprogrammer (for ex. ETL)
for Motorolla CPU 68HC705X16(32).
new model smartkey is availableprogramming all smartkey model for all
years modelsW221 -W211 – W230 – W203 -W215 – W210
New tool can programming new blank key with BIN file that's is
generating using Dump Modify software without any dissolder of key
MCU.
it communication with key via IR and RF in mercedes benz security
protocol .( that's meaning you can use it for all type keys and if
there any new key with private mcu no problem )need only to update .
Thenew Mercedes device working with smart key (old and new) using
in carsince 1997 up to 2005 – without keylessgo system. You can program
newkey (ore used) in car and program oun key if its not work more.
You readand program eeprom of CPU from Steering blocking module via
diagnosticconnector (38 pins). Desolder and read via programmer two CPU
fromElectronic Ignition Control Module.Load theese eeproms to program.
Desolder NEC CPU from the key. Soldering it on the device , select theNo
of key and program it. Solder all CPU on their places and start the car.
You can program new keys without the car – only with EISand steering
blocking module.You can read theese CPU with helpprogrammer (for ex. ETL)
for Motorolla CPU 68HC705X16(32).
new model smartkey is availableprogramming all smartkey model for all
years modelsW221 -W211 – W230 – W203 -W215 – W210
Reviews
There are no reviews yet.